716.735.3115

CNC MACHINING

Sigmamotor Inc. is well equipped with CNC lathes and mills along with conventional tools. Our shop can turn bar stock from 1/8” to 3-½” with a 10” chuck capacity. We work with many materials including aluminum, brass, hot and cold rolled steels, stainless steel (300 series to precipitation hardening 15-5ph), alloys (Hastelloy to titanium) and we specialize in plastics, from ABS to Zelux.

CNC Equipment:

(1) MIYANO CNC Lathe-JNC-45
1 ¾” Dia. Bar Capacity
8” Chuck Capacity
18 ½” Maximum Length

(1) MIYANO CNC Lathe-JNC-60
2 3/8” Dia. Bar Capacity
10” Chuck Capacity
18 ½” Maximum Length

(1) DAEWOO PUMA 230 Lathe
2 ½” Dia. Bar Capacity
8” Chuck Capacity
21” Maximum Length

(3) HWACHEON CNC Lathe-Model 35
3 ½” Dia. Bar Capacity
23” Maximum Length

(8) HAAS Super Mini Mill
Table 16x12x10

(1) HAAS Super Mini
Table 16x20x14

(1) HAAS Super Mini Mill w/Indexers
Table 16x12x10

(1) FEATURE CAM Programming System

NOTE: All CNC Mills are equipped with Stevens Subplates for fast fixture setup.

Conventional Equipment:

(2) DOALL 916A Automatic Cutoff Saw
10 ¾” Dia. Capacity

(1) SUPERMAX VCM 1 ½ VS Vertical Mill
Table Size- 9” x42” with Servo Table Feed
Two Axis Digital Readout with Memory

(1) EXCELLO 602 Vertical Mill
Table Size- 9” x36” with Automatic Feed
Three Axis Digital Readout

(2) BRIDGEPORT Vertical Mill
Table Size- 9” x 32” with Table Feed

(1) CLAUSING 1500 Engine Lathe
8” Chuck Capacity
Up to 1” 5c Collets 48” Length Between Centers

(1) DOALL Vertical Bandsaw 16-3

(1) DYNABLAST Sand Blaster

(2) QUINCY OGB-25 Rotary Screw Compressors
Refrigerated Air Dryer

We also have an assortment of conventional drill presses and sanding machines.

Inspection Equipment:

(1) HELMEL Coordinate Measuring Machine
Table Size- 20”x 30”
GEOMET 100 Software

(2) HELMEL Phoenix DCC Auto Coordinate Measuring Machine
Table Size 12”x12”
Geomet 101 Software

(1) MITUTOYO Microscope Digital Micrometer
Camera Hookup to PC Monitor
Table Size- 4”x2”

Our inspection department is also equipped with a variety of other equipment, both digital and conventional. We have micrometers, thread gages, dial indicators, gaged pins and joblocks. The quality of our products is set to a very high standard, we therefore check a sample lot for each feature of the part before shipping.

High Precision Machined Components

Contact Us

Fill out the form below and we will respond as soon as possible, If you need immediate assistance, please feel free to call us at 716.735.3115.

7 + 5 =

SigmaMotor Inc.

PO Box 298
3 North Main Street
Middleport, NY 14105
Tel: 716.735.3115
Fax: 716.735.3425